Last Updated on August 13, 2023 By Emma W. Thomas
Replacing a kitchen faucet usually takes around 1 to 2 hours. This time can vary based on the complexity of the installation, your familiarity with plumbing tasks, and any unforeseen issues that might arise during the process.
How Long Does It Take for a Plumber To Replace A Kitchen Faucet
Replacing a kitchen faucet is not an overly complex procedure, but it requires time and delicate craftsmanship for optimal results. The time it takes can fluctuate considerably depending on several decisive factors. This article will guide you through the key aspects that may affect the time needed for a plumber to replace a kitchen faucet.
- Faucet Type: Different types of faucets require different installation procedures. As an example, a pull-out version is more complex to install compared to a single-handle model. Depending on the intricacy, the time needed may range between 1 and 3 hours.
- Previous Installation: The condition and installation method of the existing faucet could also play a major part. If the old faucet is tightly installed or rusted, it may require extra time for removal. In challenging circumstances, this duration can extend to 1.5 – 2 hours.
- Access and Space: In compact spaces or situations where access is limited, it can take longer to install a new faucet. Depending on how tight the workspace is, it might add an additional 30 minutes to 1 hour to the job.
- Parts Assembly: If a faucet needs substantial assembly or if components are missing, it may require extra time for the plumber to gather the necessary parts and assemble them. This could potentially increase the process by another 30 minutes to 1 hour.
- Experience of the Plumber: The plumber’s experience undoubtedly contributes to the duration of the task. Experienced plumbers can often navigate unexpected obstacles and efficiently install a new faucet in approximately 1 – 2 hours.
How Do You Determine The Right Time To Change Your Kitchen Faucet?
Replacing the kitchen faucet in time is important for you. There are some signs that you will be able to notice if the faucet needs replacements. Let’s see what those signs and factors are-
1. Rusty Faucet
Are you having trouble moving the handle of your faucet? It can be a sign that the faucet is not doing fine. Basically, you face problems while moving the handle of the faucet when it gets rusty. The handle gets jammed due to the inner layer of rust. The faucet might also produce a cracking sound when you try to move that if it has got rusty. Moreover, you might have to wait for a couple of seconds for water after you turn on the faucet. These signs clearly indicate that your faucet has become dusty and you have to replace that.
2. Presence Of Mineral Deposits
As the faucet gets older, mineral deposits gather in the inner side of the faucet. Once you discover that a layer of mineral deposits has got thickened, you should attempt to replace the faucet. That layer prevents the faucet from functioning normally and optimally. Sometimes, you might see the presence of mineral deposits in the water output as well. When you wash dishes with that water, the mineral particles get transferred to the dishes. Later on, when you use those dishes while eating, the mineral deposits get inside your body. That’s not at all a healthy thing for you.
3. When It Is Too Old
You must consider replacing the faucet if it’s too old. As an example, if you’re using the same faucet for 10-15 years, it’s time to replace that. As a faucet gets older, you don’t get a normal water outcome from that. Most of the faucets last and works fine for 7-8 years. If you’re using a faucet that is older than 8 years, replace that with a new one. Otherwise, you might have to face different health hazards.
5. If Leakage Is Happening Frequently
If you’re noticing frequent leakages in your faucet, you should think of replacing it. Try to repair the leakages once or twice. If you have to spend on repairments repeatedly, consider buying a new one. There’s no point in spending on a damaged device repeatedly.
Let’s have a quick look at the main differences between a normal faucet and a damaged faucet.
Normal Faucet | Damaged Faucet |
Once leakage happens, you can repair that damage permanently. | Leakages would happen frequently and you will have to spend a lot on repairing those. |
You will get water instantly as you turn on the faucet and you will get clear water. | When the faucet is damaged, the water outcome might contain mineral deposits. |
You won’t get hard water from a normal faucet. | A damaged faucet will deliver hard water on a long-term basis. |
How Can You Replace Your Kitchen Faucet?
Keep at least 1.5-2 hours in your hand for replacing your kitchen faucet perfectly. There are a few steps that you have to follow when you’re trying to replace your kitchen faucet. Here, we are going to guide you step by step to replace your old kitchen faucet perfectly.
- You’ll find the shut-off valves in the cabinet underneath the sink. You should turn off both the hot water and cold water shut-off valves first.
- After that, turn on the faucet and leave that turned on for some time. In that way, you will release the pressure inside the faucet.
- You should arrange an adjustable wrench and two channel-locking pliers before starting the operation. After you have released the inner pressure, you have to disconnect the water lines using the tools.
- You’ll see that a particular nut is holding the entire faucet assembly in the proper place. Use the wrench to remove the nut so that you can displace the faucet assembly.
- In case if the sink is connected to a hose, disconnect the hose before you proceed further.
- Now, you can comfortably pull off the old faucet from its place and keep it away.
- Make sure that you clean the sink after you pull off the old faucet. You can use a liquid cleaner to clean the sink. Clean the whole area properly before you install the new one.
- Now, install the new faucet in the right place where the old one was placed. You can measure the place before installing it. In that way, you can avoid the chances of misplacing the new faucet.
- Check if the new faucet has fitted into the proper place of the sink or not. If you find cracks, you can fill those with a plumber’s putty.
- Now put the main nut in the right place that holds the faucet tightly and properly. Use the wrench and pliers to complete the installation.
- After you complete the installation process, you have to attach the water connections to the valve. Also, attach the hose to the sink.
- Once you have completed the entire process, turn on the water lines and the shut-off valves. Then, open the faucet to check if there is any leakage anywhere. If you find any leakage, you should tighten the whole arrangement and all the connections.
This is the complete guide to replacing your old faucet with the new one. You just have to follow these instructions step by step to complete the replacement. Once you gain expertise in replacing the faucet yourself, you won’t have to call up a plumber frequently. Whenever the faucet gets damaged, you will be able to repair that yourself easily. That will save you from spending extra money on repairing your kitchen faucet.
How Long Can It Take To Replace Your Kitchen Faucet?
Are you familiar with plumbing tasks? If you’re, then you will not have to spend a lot of time. Otherwise, you will find it very difficult to complete the entire process. It will take a lot of time for you as well. Let’s check out how long it takes in average to get the task completed-
1. The first phase consumes a lot of time. In this phase, you have to pull out the old faucet and that’s probably the hardest part. After a long time, when you attempt to open the nuts and connections, that seems pretty difficult. The nuts get jammed and sometimes get rusty as well. For a professional, it might take 20-30 minutes to displace the old faucet. But as a beginner, you might have to spend 45 mins to complete that.
2. After you pull off the old faucet, you are supposed to clean the sink. That’s a time-taking task indeed. Therefore, 20-25 mins will pass easily while you clean the sink properly.
3. After cleaning, you will have to place the new faucet in the right place and connect all the water lines. This phase usually doesn’t consume too much time. Professionals will install the new faucet within 15-20 mins while beginners will take 5-10 mins more.
So, you might have to spend approximately 1-1.5 hours to get the whole task done.
Bottom Line
It’s not too difficult to replace your kitchen faucet if you have little knowledge of plumbing. If you don’t even have the basic knowledge of plumbing, don’t try to do it yourself. In such a case, it’s better to call a professional plumber. But plumbers charge a lot of amount as installation charges. If you’re not ready to spend a lot of money on the installation of the new faucet, try the above-mentioned steps. The thorough guideline must help you to replace the old kitchen faucet quickly.
References:
https://anytimeplumbing.net/how-long-should-it-take-a-plumber-to-replace-the-kitchen-faucet/
https://kitchenseer.com/how-long-to-replace-a-kitchen-faucet/
Emma is a graduate of Domestic Science or Family and Consumer Sciences (Home Economics) from the University of Wisconsin. She has 7 years of experience Working with the strategic section of BestBuy and now writing full-time for Homeeon.
From Managing the Home, Interiors, Cleaning, and Exteriors to Gardening and everything about Making A Home Liveable – is her passion and this Homeeon is the result of this.
Emma loves decorating her home with the best stuff found online. She cares about quality over anything and writes reviews about them here in Homeeon. Get in touch with her over Pinterest.
Keep reading her blogs.